Aurora Primer & Tintable Base Paint

Aurora Primer and Tintable Base paint is made with a richly pigmented, thick formula.  It can be used on bare or previously painted wood, brick, stone, plaster, metal, glass and plastic.

Quick Drying and ultra low VOC's, non toxic & environmentally safe.

Self Levelling with a matte finish.

Contains UV Stabilizers to Protect Colours From Fading.

Can be mixed with Aurora Concentrated Colour Pigments or Aurora 3in1 Paint, Primer and Sealer to create your own colours.

SURFACE PREP:

All surfaces should be scuff sanded and thoroughly cleaned, from any grease or wax, before application.

APPLICATION:

Stir the pot, or shake the bottle thoroughly before use. Apply at room temperature, using long, even brush strokes with very light, even pressure.

DRY TIME:

Allow 30 minutes between each coat, allowing it to dry thoroughly. Recoat after 30 minutes. Once happy with coverage leave to sit for 2 hours before moving on with your next step.

CURE TIME: Allow 12 hours for full cure.

COVERAGE: Approximately 12m2 per litre.

CLEANING: Clean all equipment with warm water.  Dry brushes thoroughly after cleaning.  Do not empty into drains or water courses.

Protect from freezing. 

 (Please check AURORA Data Sheet for more information on humidity & temp for best performance https://wilsonbrownsupplies.com/pages/technical-data )