Hyperion Topcoat - Matt

**This is the Matt finish**  Apply your final 1 or 2 coats with matt after building layers with Hyperion Topcoat - Gloss.  Using too many coats of matt finish can make final product have a cloudy look.**

HYPERION is a Water based Super Tough, High Solids, Ultra Low VOCs, Scratch resistant Top Coat that dries Crystal Clear and leaves a beautiful gloss finish, clear enough to see your own reflection!!!

Hyperion is an amazing product that does not leave any amber or blue tint.  It builds to a high depth super quick to give a great solid finish, due to its short recoat time. It can also be mixed with all other products in the W&B range.

Adheres to wood, metal, acrylic, glass and more.

Excellent for use on Tumblers, Instruments, Paintings, Crafts & So much more…

Environmentally Safe – Ultra low VOCs

Application: Can be brushed or sprayed

Clean Brushes with warm water, being sure to dry brush well after cleaning

Quick Drying – Recoat in 2 hours – Dry to the touch in 30 mins to an hour

Projects are fully hardened 10 days after last coat is applied

Minimum Temperature usage 10 Degrees Celsius – (Please check HYPERION Data Sheet for more information on humidity & temp for best performance https://wilsonbrownsupplies.com/technical/ )

Can be used on children's toys as a protection, as toy safe.

Food Safe when Dry.

Heatproof up to 100 degrees Celsius (212 degrees Fahrenheit)

HOW TO USE:

You need to measure 3 - 3.5ml per 10oz of tumbler, so for a 20oz it would be 7.5ml, a 30oz 11ml etc.

Your first coats over glitter or fabric can be flood coats, so apply as much as you feel you need.

After 3 coats, you want to do a gentle sand (at this point if you've been flood coating, drop back to the recommended volume per layer amount.)

After that it’s just sand when you feel it’s needed. We do recommend one last sand prior to your last coat just to tidy any areas up but if your cup is fine, this is not necessary.

Helios

Helios II Crafters Glue – The most amazing crafters glue available.  Dries crystal clear to leave your glitter so sparkly.
Perfect with foils, tack-it method, applying and sealing glitter, paper, cards, metal, fabric, plastic, brick and so much more.  It’s a NON solvent, eco friendly, water based Crafters Glue that makes high strength, water resistant permanent bonds.  

How to Use:

You need only a thin layer of Helios on your cup.  Make sure there are no streaks of glue left after applying your thin layer before continuing to add the next part of your design.

Helios can also be used to add glitter, fabric, paper and card and can be used to seal all of these after a minimum of 30 mins.

It can be used to seal Alcohol Inks, but the inks must be left to dry for a minimum of 12 hours before using Helios.

Dry time for Helios is 30 min, it can be recoated or sealed after it is dry.

Once you've finished using Helios and want to move onto the next part of your project (which is usually HP or Epoxy) allow Helios to dry for at least one hour, sometimes 2 if you have done many coats of Helios.

Helios remains tacky after it dries and requires the use of a topcoat like Hyperion.  Easy to clean from your brushes and hands.  Can be used with a brush and requires cleaning with warm water.  Dry brush thoroughly after cleaning.

Protect from freezing.